OEM MPPT 12V 300w Wind Solar Hybrid Charge Controller For Street light
This 300W wind solar hybrid charge controller is special designed for small off grid wind solar hybrid generation system. It suitable for streelight system, monitoring system and so on. It with two groups of DC output
1. Features
1.1 Basic Functions
- Wind Turbine and Load Adaptive Impedance Matching, maximize energy utilization
There is internal resistance in Wind generators, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power
- Protect wind generator from over-revolution speed, over-voltage and over-current
Max revolution speed, max voltage and max current of wind generator could be set. Once the actual revolution speed, voltage or current over the set ones, PWM intelligent unloading will start automatically. That protect wind generator
- Intelligent limiting of batteries max current
Batteries maximum capacity could be set through this controller. According to the set maximum capacity, controller could calculate the maximum charging current. Then batteries will be protected
- Function of manual brake
- Wind charging manual switch
- Solar charging manual switch
- TWO DC output, each one has nine output control modes
- DC output manual switch
- Boost&buck function in one
1.2 Optional Function
- USB function
- RS232 interface
- RS485 interface
- Anemometer function
2. Parameters
| Model |
YQHLM01-01/12
|
YQHLM02-01/12
|
YQHLM03-01/12
|
| Rated system voltage |
12V |
| Rated wind generator power |
100W |
200W |
300W |
| Rated solar panel power |
100W |
| Max. input voltage of solar panel |
60V |
| Battery low voltage disconnect |
10.2V |
| Battery low voltage reconnect |
11.5V |
| Equalize charging voltage |
14.7V |
| Equalize charging recovery voltage |
13.2V |
| Float charging voltage |
13.5V |
| Over load voltage |
17.5V |
| Over load recovery voltage |
15V |
| Wind dumpload rotate speed |
500R |
| Wind pole logarithm |
10D |
| Wind starting charging voltage |
6V |
| Wind dumpload voltage |
60V |
| Rated output current |
15A |
| 1st output working model |
PV control (light on: 6V, light off: 6V) (Adjustable) |
| 2nd output working model |
PV control on, full power working for 5hrs, light control off (adjustable) |
| Dump load control model |
Over rotate speed limiting, over voltage limiting, Over current limiting, PWM
|
| Wind charging technology |
MPPT (Boost&Buck) |
| Solar charging technology |
PWM |
| Display |
LCD |
| Display content |
Battery: voltage, charging current, battery power
Wind: voltage, charging current, rotate speed, output current&power
Solar: voltage, charging current
System: status, generation power, error code
|
| Ambient temperature |
-20℃~55℃ |
| Humidity |
35~85%, non-condensing |
| Standy by consumption |
≤3W |
| Protection type |
Battery: over-discharge, over-charge, anti-reverse connection
Wind: Over rotate speed, over voltage, over current
|
| Controller size |
203*152*97.4mm |
| N.W |
2.1KG |
| Packing size |
290*170*190mm |
| G.W |
2.5KG |
| Optional function |
RS232, RS485, USB, Anemometer |
| Warranty |
2 years |
- Remark 1: The parameters are marked in Red color can be adjusted by users according to different requirement of different battery
- Remark 2: This kind 300W wind solar hybrid charge controller suitable to small power system, especially streetlight and monitoring system, if you have wind generator and solar panel different from the power listed, please feel free to contact us for right model.
3. Application
Off grid wind solar hybrid system
Streetlight system
Monitoring system
Product Tags:
|
|
High Efficiency Wind Generator Charge Controller Simple Mechanism For Street Light Images
|
